[BACK]Return to updatequery.piml CVS log [TXT] [DIR] Up to [LON-CAPA] / doc / loncapafiles

Diff for /doc/loncapafiles/updatequery.piml between versions 1.83 and 1.84.2.4

version 1.83, 2016/07/29 17:26:44 version 1.84.2.4, 2024/06/29 15:58:25
Line 33  http://www.lon-capa.org/ Line 33  http://www.lon-capa.org/
 <target dist='default'>/</target>  <target dist='default'>/</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 $|=1;  $|=1;
   use strict;  use strict;
   
   print(&lt;&lt;END);    print(&lt;&lt;END);
   
   
Line 128  my $domainTabExtras; Line 129  my $domainTabExtras;
 my $primaryLibServer;  my $primaryLibServer;
 my $protocol;  my $protocol;
 my $intdom;  my $intdom;
   my $desiredhostname;
 my @libservers = ();  my @libservers = ();
 unless (-e "<TARGET />") {  unless (-e "<TARGET />") {
   print(&lt;&lt;END);    print(&lt;&lt;END);
Line 137  If you have questions, please visit http Line 139  If you have questions, please visit http
 or contact helpdesk\@loncapa.org.  or contact helpdesk\@loncapa.org.
   
 ===============================================================================  ===============================================================================
 The following 7 values are needed to configure LON-CAPA:  The following 8 values are needed to configure LON-CAPA:
 * Machine Role  * Machine Role
 * LON-CAPA Domain Name  * LON-CAPA Domain Name
 * LON-CAPA Machine ID Name  * LON-CAPA Machine ID Name
Line 145  The following 7 values are needed to con Line 147  The following 7 values are needed to con
 * LON-CAPA Domain's Primary Library Server Machine ID  * LON-CAPA Domain's Primary Library Server Machine ID
 * Web Server Protocol  * Web Server Protocol
 * Internet Domain Name of Your Institution  * Internet Domain Name of Your Institution
   * Hostname
 ===============================================================================  ===============================================================================
   
 In addition, a Support E-mail Address can also be included. If  In addition, a Support E-mail Address can also be included. If
Line 282  END Line 285  END
   }    }
 }  }
   
   
 # get domain description  # get domain description
 # accept if valid, if not valid, tell user and repeat  # accept if valid, if not valid, tell user and repeat
 $flag=0;  $flag=0;
Line 547  END Line 549  END
   }    }
 }  }
   
   # get hostname
   # accept if valid, if not valid, tell user and repeat
   $flag=0;
   my $posshostname;
   if (($hostname =~ /^[A-Za-z0-9\-]+$/) && ($intdom ne '')) {
       $posshostname = $hostname.'.'.$intdom;
   } 
   if (($hostname =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
       ($hostname =~ /^[A-Za-z0-9.\-]+$/)) {
       $posshostname = $hostname;
   }
   while (!$flag) {
     print(&lt;&lt;END);
   
   ****** Hostname of the server/VM *****
   
   The hostname of the server/VM is required. This will be similar to:
   somename.ustate.edu or somename.department.ustate.edu, and would be 
   the web address which users would point their web browsers at to
   access the server.
   
   END
   
   if ($posshostname) {
       print "ENTER HOSTNAME OF SERVER [$posshostname]:\n";
   } else {
       print "ENTER HOSTNAME OF SERVER:\n";
   }
   
     my $choice=&lt;&gt;;
     chomp($choice);
     if (($choice =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
         ($choice =~ /^[A-Za-z0-9.\-]+$/)) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'hostname'."\t".$choice."\n");
       close(OUT);
       $desiredhostname=$choice;
       $flag=1;
     } elsif (($choice eq '') && ($posshostname ne '')) {
       open(OUT,'&gt;&gt;/tmp/loncapa_updatequery.out');
       print(OUT 'hostname'."\t$posshostname\n");
       close(OUT);
       $desiredhostname = $posshostname;
       $flag = 1;
     } else {
       print "Invalid input (only letters, numbers, - and . allowed, with at least one .).\n";
     }
   }
   
 # update loncapa.conf  # update loncapa.conf
 my $confdir = '/etc/httpd/conf/';  my $confdir = '/etc/httpd/conf/';
 if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16') {  if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'sles15' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16' || '<DIST />' eq 'ubuntu18' || '<DIST />' eq 'ubuntu20' || '<DIST />' eq 'ubuntu22' || '<DIST />' eq 'ubuntu24' || '<DIST />' eq 'debian10'> || '<DIST />' eq 'debian11' || '<DIST />' eq 'debian12') {
      $confdir = '/etc/apache2/';       $confdir = '/etc/apache2/';
 }     }   
 my $filename='loncapa.conf';  my $filename='loncapa.conf';
Line 607  END Line 657  END
 </file>  </file>
 <file>  <file>
 <target dist='default'>/etc/httpd/conf/</target>  <target dist='default'>/etc/httpd/conf/</target>
 <target dist='sles10 sles11 sles12 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 suse12.2 suse12.3 suse13.1 suse13.2 debian5 debian6 ubuntu6 ubuntu8 ubuntu10 ubuntu12 ubuntu14 ubuntu16'>/etc/apache2/</target>  <target dist='sles10 sles11 sles12 sles15 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 suse12.2 suse12.3 suse13.1 suse13.2 debian5 debian6 debian10 debian11 debian12 ubuntu6 ubuntu8 ubuntu10 ubuntu12 ubuntu14 ubuntu16 ubuntu18 ubuntu20 ubuntu22 ubuntu24'>/etc/apache2/</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 sub securesetting {  sub securesetting {
     my (%perlvar)=@_;      my (%perlvar)=@_;
Line 710  my %perlvarstatic; Line 760  my %perlvarstatic;
  }   }
     }      }
   
     if (!$protocol) {      if ((!$protocol) || (!$desiredhostname)) {
         foreach my $file (@hosts_files) {          foreach my $file (@hosts_files) {
             open(IN,'&lt;'.$file);              open(IN,'&lt;'.$file);
             while(my $line = &lt;IN&gt;) {              while(my $line = &lt;IN&gt;) {
                 if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:(https?)/) {                  if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:([^:]+)\:(https?)/) {
                     $protocol = $1;                      if (!$desiredhostname) {
                     chomp($protocol);                          $desiredhostname = $1;
                       }
                       if (!$protocol) { 
                           $protocol = $2;
                           chomp($protocol);
                       }
                     last;                      last;
                 }                  }
             }              }
Line 767  my %perlvarstatic; Line 822  my %perlvarstatic;
     }      }
         
 # implement editing logic below, interactively  # implement editing logic below, interactively
 # update loncapa.conf until 14 is entered  # update loncapa.conf until 15 is entered
   
 my $flag=0;  my $flag=0;
   
Line 784  This is now the current configuration of Line 839  This is now the current configuration of
  6) Support E-mail Address: $perlvar{'lonSupportEMail'}   6) Support E-mail Address: $perlvar{'lonSupportEMail'}
  7) Web Server Protocol (http or https): $protocol    7) Web Server Protocol (http or https): $protocol 
  8) Internet Domain Name: $intdom    8) Internet Domain Name: $intdom 
  9) Role: $perlvar{'lonRole'}   9) Hostname: $desiredhostname
 10) Cache Expiration Time: $perlvar{'lonExpire'}  10) Role: $perlvar{'lonRole'}
 11) Server Load: $perlvar{'lonLoadLim'}  11) Cache Expiration Time: $perlvar{'lonExpire'}
 12) User Load: $perlvar{'lonUserLoadLim'}  12) Server Load: $perlvar{'lonLoadLim'}
 13) Allow only secure connections: $securestatus   13) User Load: $perlvar{'lonUserLoadLim'}
 14) Everything is correct up above  14) Allow only secure connections: $securestatus 
   15) Everything is correct up above
 END  END
   
 my @error;  my @error;
Line 855  if (!defined($primaryLibServer)) { Line 911  if (!defined($primaryLibServer)) {
   
 if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }  if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
   print(&lt;&lt;END);    print(&lt;&lt;END);
 ENTER A CHOICE OF 1-13 TO CHANGE, otherwise ENTER 14:  ENTER A CHOICE OF 1-14 TO CHANGE, otherwise ENTER 15:
 END  END
 my $choice=&lt;&gt;;  my $choice=&lt;&gt;;
 chomp($choice);  chomp($choice);
Line 947  END Line 1003  END
   }    }
   elsif ($choice==9) {    elsif ($choice==9) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 9) Role: $perlvar{'lonRole'}  9) Hostname of Server/VM
   ENTER NEW VALUE:
   
   END
       my $choice2=&lt;&gt;;
       chomp($choice2);
       $desiredhostname=$choice2;
     }
   
     elsif ($choice==10) {
     print(&lt;&lt;END);
   10) Role: $perlvar{'lonRole'}
 ENTER NEW VALUE (this should be either 'access' or 'library'   ENTER NEW VALUE (this should be either 'access' or 'library' 
                  if in doubt select 'library'):                   if in doubt select 'library'):
 END  END
Line 955  END Line 1022  END
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonRole'}=$choice2;      $perlvar{'lonRole'}=$choice2;
   }    }
   elsif ($choice==10) {    elsif ($choice==11) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 10) Cache Expiration Time: $perlvar{'lonExpire'}  11) Cache Expiration Time: $perlvar{'lonExpire'}
 ENTER NEW VALUE (in seconds, 86400 is a reasonable value):  ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonExpire'}=$choice2;      $perlvar{'lonExpire'}=$choice2;
   }    }
   elsif ($choice==11) {    elsif ($choice==12) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 11) Server Load: $perlvar{'lonLoadLim'}  12) Server Load: $perlvar{'lonLoadLim'}
 ENTER NEW VALUE:  ENTER NEW VALUE:
 END  END
     my $choice2=&lt;&gt;;      my $choice2=&lt;&gt;;
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonLoadLim'}=$choice2;      $perlvar{'lonLoadLim'}=$choice2;
   }    }
   elsif ($choice==12) {    elsif ($choice==13) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 12) User Load: $perlvar{'lonUserLoadLim'}  13) User Load: $perlvar{'lonUserLoadLim'}
 Numer of users that can login before machine is 'overloaded'  Numer of users that can login before machine is 'overloaded'
 ENTER NEW VALUE (integer value, 0 means there is no limit):  ENTER NEW VALUE (integer value, 0 means there is no limit):
 END  END
Line 983  END Line 1050  END
     chomp($choice2);      chomp($choice2);
     $perlvar{'lonUserLoadLim'}=$choice2;      $perlvar{'lonUserLoadLim'}=$choice2;
   }    }
   elsif ($choice==13) {    elsif ($choice==14) {
   print(&lt;&lt;END);    print(&lt;&lt;END);
 13) Allow only secure connections: $securestatus   14) Allow only secure connections: $securestatus 
 The Lon-CAPA communication daemons lonc and lond can be configured to  The Lon-CAPA communication daemons lonc and lond can be configured to
 allow only secure connections by default.  allow only secure connections by default.
   
Line 1012  END Line 1079  END
     }      }
     ($securestatus,$securenum)=&securesetting(%perlvar);      ($securestatus,$securenum)=&securesetting(%perlvar);
   }    }
   elsif (($choice==14) && (!@error)) {    elsif (($choice==15) && (!@error)) {
     $flag=1;      $flag=1;
   }    }
   else {    else {
     print "Invalid input.\n";      print "Invalid input.\n";
   }    }
 }  }
   
     open(OUT,"&gt;$confdir$filename") or      open(OUT,"&gt;$confdir$filename") or
       die("Cannot output to $confdir$filename\n");        die("Cannot output to $confdir$filename\n");
     foreach my $key (keys %perlvar) {      foreach my $key (keys %perlvar) {
Line 1038  END Line 1106  END
 <target dist='default'>loncom/hosts.tab</target>  <target dist='default'>loncom/hosts.tab</target>
 <perlscript mode='fg'>  <perlscript mode='fg'>
 unless (-l "<TARGET />") {  unless (-l "<TARGET />") {
   my $hostname=`hostname -f`;chomp($hostname);    if ($desiredhostname eq '') { 
         my $hostname=`hostname -f`;chomp($hostname);
         $desiredhostname = $hostname;
     }
   my $date=`date -I`; chomp($date);    my $date=`date -I`; chomp($date);
   my $lonHostID=$perlvar{'lonHostID'};    my $lonHostID=$perlvar{'lonHostID'};
   $lonHostID=~s/[^\w\-.]//g;    $lonHostID=~s/[^\w\-.]//g;
   my $lineexistflag=0;    my $lineexistflag=0;
   my $hostidexistflag=0;    my $hostidexistflag=0;
   my $line2insert=&lt;&lt;END;    my $line2insert=&lt;&lt;END;
 $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol:$intdom  $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$desiredhostname:$protocol:$intdom
 END  END
   if (!$domainTabExtras) {    if (!$domainTabExtras) {
  $domainTabExtras=':::::';   $domainTabExtras=':::::';
Line 1055  END Line 1126  END
     open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or      open(OUT,'&gt;../'.$lonCluster.'_hosts.tab') or
       die('file generation error');        die('file generation error');
       print(OUT $line2insert);        print(OUT $line2insert);
       print OUT ("^$hostname:$protocol\n");        print OUT ("^$desiredhostname:$protocol\n");
     close(OUT);      close(OUT);
     open(OUT,'&gt;../'.$lonCluster.'_dns_hosts.tab') or      open(OUT,'&gt;../'.$lonCluster.'_dns_hosts.tab') or
       die('file generation error');        die('file generation error');
Removed from v.1.83  
changed lines
  Added in v.1.84.2.4

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>