--- loncom/html/adm/help/tex/Clicker_Registration.tex 2007/07/05 21:37:31 1.1 +++ loncom/html/adm/help/tex/Clicker_Registration.tex 2013/08/27 05:10:21 1.9 @@ -1,11 +1,44 @@ -\label{ClickerRegister} +\label{Clicker_Registration} + + + +LON-CAPA users can register their clickers within LON-CAPA. +To register your clicker, do the following: + +\begin{enumerate} + +\item Either select \textbf{Preferences} from the dropdown list displayed +when you mouseover your name at the top left of the screen or +click \textbf{Main Menu} on the Inline Menu and +then select \includegraphics[width=0.03\paperwidth]{pref} \textbf{Set user preferences} +in the \textbf{My Space} group +\item At the \textbf{Set User Preferences} screen, select +\includegraphics[width=0.03\paperwidth]{network-workgroup} +\textbf{Register Response Devices ("Clickers")}. +\item Type your clicker ID in the text box. +Below are instructions on how to find your clicker ID for various clicker models. +\item Click the \fbox{Save} button. + +\end{enumerate} + + + {\bf i$>$clicker}: on i$>$clicker devices, the clicker ID is located on a sticker on the back. \begin{figure} -\begin{center}\includegraphics[ width=0.50\paperwidth]{iclicker}\end{center} -\caption{Location of Label on i>clickers} +\begin{center}\includegraphics[ width=0.30\paperwidth]{iclicker}\end{center} +\caption{Location of Label on i$>$clickers} \end{figure} +{\bf Turning Technology}: on Turning Technology devices, the clicker ID is located on a sticker on the back. + +\begin{figure} +\begin{center}\includegraphics[ width=0.30\paperwidth]{turning}\end{center} +\caption{Location of Label on Turning Technology clickers} +\end{figure} + + + {\bf Interwrite RF}: on the RF version of the Interwrite clicker, you need to go through a number of steps. When you first switch it on, it will look for a class. Cancel that by pressing the asterisk key. \begin{figure} \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite1}\end{center} @@ -36,3 +69,55 @@ The clicker ID is listed. \caption{Interwrite Step 5} \end{figure} +{\bf Interwrite IR}: the clicker ID (6 digits) is located on a sticker on the back of the device. + +{\bf Interwrite Virtual}: The clicker ID is the Media Access Control address (``MAC address'') of your network card. MAC addresses look like this + +{\tt 01-23-45-67-89-ab} + +or like this + +{\tt 01:23:45:67:89:ab} + +How to locate this depends on your operating system. + +{\it Windows Vista} +\begin{itemize} +\item Click the Start Button and select Start Search. +\item Type {\tt cmd} in the blank box. Hit Enter. +\item In the command prompt window, type {\tt ipconfig /all} +\item Locate the number that goes with the adapter you would use in the lecture hall. +\end{itemize} + +{\it Windows NT / 2000 or XP} +\begin{itemize} +\item After clicking on the Start Button, click on Run. +\item Type {\it command} in the blank box. Click on OK. +\item Once a small black window appears, type in {\tt winipcfg} +\item Locate the number to the right of ``Physical Address.'' +\end{itemize} + +{\it Windows 95/98/ME} +\begin{itemize} +\item After clicking on the Start Button, click on Run. +\item Type in {\tt winipcfg} in the blank box. Click on ``OK.'' +\item Look under the info for the Ethernet adapter you would use in the lecture hall. +\item Locate the number next to ``Adapter Address.'' +\end{itemize} + +{\it Macintosh (OS X)} +\begin{itemize} +\item Under the Apple menu, select "System Preferences". +\item Select the "Network" Pane. +\item Doubleclick on the adapter you are using, for example ``Airport'' or ``Built-in Ethernet'' (use the adapter you would use in the lecture hall). +\item Click on the ``Airport'' or ``Ethernet'' tab, respectively - the number is displayed. +\end{itemize} + +{\it Linux} +Type {\tt /sbin/ifconfig -a} and look up the relevant info. For example: +\begin{verbatim} +[root@foo bar]# /sbin/ifconfig -a +eth0 Link encap:Ethernet HWaddr 01:23:45:67:89:AB +... +\end{verbatim} +The number is the HWaddr.